|
|
CCG Cable Glands and Terminations
CCG Products are produced under the quality
management system ISO9001-2000 standard underwritten by UL USA.
CCG Products are internationally certified to British,
CENELEC/ATEX, Chinese, South African IEC and Australian
standards where applicable.
Product Range
CCG Cable Glands manufacture
and supply a wide range of
CCG Industrial Cable Glands,
CCG
Hazardous area Cable Glands,
CCG Mines and Quarries Cable Glands, CCG Junction boxes, CCG
Utility boxes, CCG Posifit EExe Junction boxes.
The simplicity of the CCG - or 'Captive
Cone Glands' and the 'built in safety' concept
ensures that whenever CCG cable glands are used, all parts are
correctly, making the CCG Cable Glands the easiest and safest
glands to install.
CCG Cable Glands are produced
under the quality management system ISO9001-2000 standard
underwritten by UL USA.CCG Cable Glands are internationally
certified to British, CENELEC/ATEX, Chinese, South African, IEC
and Australian standards.
One of the most common ways for an installation to fail its Ex
certification is through a wrongly specified or badly fitted
Cable Gland.
If the
Cable Gland is ineffective,
then the apparatus to which it is attached will not pass
hazardous area equipment certification.
Most Cable Gland consist of several components such as cones,
cone rings and seals, all of which must be correctly fitted to
achieve a safe Ex proof installation. Should the installer
perhaps misplace, drop or wrongly align a component, the gland
will either not hold, earth or seal the cable to the apparatus
to which it is attached. This means that the Ex certification of
the apparatus is now compromised.
A solution to this problem is the “Captive
Component Gland” design from CCG.
The built in safety features of
CCG Ex Cable GlandsCCG Ex Cable Glands
centre on the fact that they do not have any loose components
such as seals, cones and cone rings, which can get lost during
installation. All the components are held captive so the
possibility of leaving out a component or fitting the wrong item
is eliminated.
By specifying the “Captive Component Gland” system, the operator
can guarantee the proper installation of the Gland and the
integrity of the apparatus to which the gland is installed. This
concept is very important for installations in unsupervised
remote locations or projects in developing countries where
unskilled labour is very often used.
The “Captive
Component Gland” is also a major advantage to systems
integrators, OEMs and suppliers of complete apparatus such as
enclosures, light fittings etc all of which are assembled with
glands as part of a complete product package. Instructions for
the installation and use of these complete systems and apparatus
are usually quite detailed but instructions for the glands,
which are supplied attached as sub components, are often
overlooked. The problem now arises whereby the installer, who
may now be on the other side of the world will be puzzled as to
how cable glands with loose parts need to be assembled.
The simplicity of the “Captive
Component Gland” and the Built in Seals concept means
that no matter where in the world CCG Products are being
installed, the simply 2 part assembly will mean that all the
parts have been correctly fitted. This built in safety will give
the specifier, supplier and installer confidence that the total
installation’s Ex certification will not been compromised.
Products
CCG A2 Compression Cable Glands
CCG A2EX EExde Compression Cable Gland
CCG A2F EExde Compression Cable Gland
CCG BarrierTexTM
A, Barrier Gland for Armoured Cable
CCG CX/CZ Captive cone gland for BRAIDED or STEEL TAPE
CCG
E1EX Cable Gland MAC EExde
CCG E1EX Lead Seal Cable Gland for Lead Sheathed Cable
CCG E1W Captive Cone Cable Gland
CCG Posifit Junction Boxes
CCG Thread Reducers / Adaptors |
